290 Raub Road, Quakertown, Pennsylvania 18951
Phone: 215-538-9323 Fax: 215-538-0158 Email: rdent@rdent.com
Please contact
Bart's Parts
for all inquiries.
RD Enterprises is no longer stocking these kits or parts.
Bart's Parts at Hobby City
Watertown, SD
Phone 605-886-7443
Email
bartspartsrc@hotmail.com
Website www.bartspartsrc.com
Parts for RC Sprint Cars
|
Aluminum
Wheels |
|
|
We are stocking aluminum wheels that will accept rubber tires! As you can see in the photo these wheels have the grooves on the outside diameter that allow the mounting of rubber tires. The wheels are machined with a fake "beadlock" rim and fake fasteners for a realistic appearance. These wheels require a hub adapter to attach to your axle shaft. Hub adapters are shown further below on this page. Wheels are available in both 2.0" and 2.2" diameters and a variety of widths and offsets.
|
| Part number and
sizes of wheels that accept rubber tires are shown below. Wheels are sold individually so you can mix and match diameters and widths. We do not sell tires. 2.0" Diameter Wheels Front 2.0" Wheels BP4009 2.0 x 1" Front Wheel Narrow Track (1.150" wide, .335" front side, .720" back side) BP4010 2.0" x 1" Front Wheel Medium Track (1.150" wide, .500" front side, .565" back side) BP4011 2.0" x 1" Front Wheel Wide Track (1.150" wide, .640" front side, .415" back side) Rear 2.0" Wheels BP4020 2.0" x 1.5" Rear Wheel Narrow Track (1.550" wide, .515" front side, .935" back side) BP4021 2.0" x 1.5" Rear Wheel Medium Track (1.550" wide, .835" front side, .635" back side) BP4027 2.0" x 1.5" Rear Wheel Wide Track (1.550" wide, 1.01" front side, .440" back side) 2.2" Diameter Wheels Front 2.2" Wheels BP4013 2.2" x 1" Front Wheel Narrow Track (1.040" wide, .335" front side, .640" back side) BP4014 2.2" x 1" Front Wheel Medium Track (1.040" wide, .500" front side, .475" back side) BP4015 2.2" x 1" Front Wheel Wide Track (1.040" wide, .650" front
side, .325" back side) BP4024 2.2" x 1.75" Rear Wheel Narrow Track (1.7" wide, .440" front side, 1.18" back side) BP4025 2.2" x 1.75" Rear Wheel Medium Track (1.7" wide, .620" front side, 1" back side) BP4022 2.2" x 1.75" Rear Wheel Wide Track (1.7" wide, .775" front side, .840" back side) BP4026 2.2" x 1.75" Rear Wheel X-Wide Track (1.7" wide, 1.18" front side, .440" back side)
BP4023 2.2" x 2.0" Rear Wheel Truck
Type (2.1" wide, 1.165" front side, .830" back side) NOTES:
|
|
 |
This photo shows a rubber tire
mounted on a 2.0" rear wheel. The detailed machining of the
wheel can be seen on the outer rim edge simulating real beadlock
rims. There is additional detail in the center of the wheel that
represents the fasteners of a split-rim type wheel as used on real sprint
cars.
The gold piece in the center is the hub adapter #BP4108. The adapter has been painted gold (they come in plain aluminum) and adapters are not included with the wheels. |
 |
This photo shows the same wheel
and tire as above. The hub adapter is bolted to the wheel using 4-40
x 1/4" or 5/16" button head screws. Hub adapters and screws are sold separately. |
|
|
Aluminum "Bead
Lock" Wheels for foam tires To give your finished sprint car the most realistic appearance possible install these beautiful aluminum wheels. Outside diameter 2"; smooth outside for foam tires only. Adapters are required to mount these wheels on your axles (see adapter information below). Front Wheels (1-1/8" wide) #BP4001 Rear Wheels (1-1/2" wide ) #BP4002 Rear Wheels (2" wide) #BP4003 |
|
|
LIGHTWEIGHT
STYLE! Thin flange design for reduced weight. Aluminum Front Wheel Hub Adapters
|
|
|
LIGHTWEIGHT
OFFSET
FRONT ADAPTERS
Thin flange design for reduced weight. Aluminum Front Wheel
Hub Adapters
|
|
|
LIGHTWEIGHT STYLE!
Thin flange and drilled center for reduced weight. Aluminum Rear Wheel Hub Adapters
for 3/16" axle
|
|
|
Aluminum Rear Wheel Hub Adapters for
1/4" axle Mount aluminum wheels to original Associated RC10 1/4" rear axles with these precision-machined aluminum adapters. They can be mounted inside the wheel to increase track width or outside wheel to decrease width. Rear Wheel Adapter Pair #BP4107 |
|
Slipper Clutch Eliminator
#RD0101 Lighter is faster! Get rid of the slipper clutch on your Stealth transmission and improve the acceleration of your car. This slipper clutch eliminator slips on the top gearbox shaft and is secured with a 4-40 set screw. Standard spur gears bolt directly onto the eliminator. Note: This part is for use on electric cars only. We do not offer a clutch eliminator for nitro cars.
|
 |
Aluminum RC10GT Front Arms
#BPG1151 Replace the wide track arms from the GT with these precision aluminum arms to create a narrow front track. Use with the Aluminum RC10 Rear Arms #BP1015. |
 |
Aluminum RC10 Rear Arms
#BP1015 Same dimensions as the original RC10 but much stiffer because these are made from aluminum! Use these on an RC10-based sprinter to improve performance and durability. Install these on your nitro sprinter along with the RC10GT Aluminum Front Arms #BPG1151 for a narrow rear track. |
 |
Aluminum RC10 Front Arms
#BP1014 Same length as the original RC10 "wide-track" arms #6206, these aluminum arms will improve performance and durability. Three shock mounting positions increase your suspension tuning ability. |
|
Front Bumper #BP2003 Aluminum bumper mounts to the front suspension tower. Provides valuable protection for the front of the chassis and adds a very realistic look to your sprint car. |
|
Aluminum Headers #BP3200 This is one part that makes a huge difference in the appearance of a sprint car. These headers add a touch of realism that will set your car apart from the crowd. |
Replacement Parts
If you've really been racing you may have damaged a part or two!
Nerf Bar Left Side, electric or gas #BP2001L
Nerf Bar Right Side, electric #BP2001R
Body Kit, electric #BP3000 (includes hood, side panels and tail tank)
Top Wing Kit, electric or gas #BP3020 (includes aluminum center, Lexan sides and mounts)
Aluminum Top Wing Center, electric or gas #BP3021A (Replacement aluminum center section only)
Lexan Top Wing Center, electric or gas #BP3021L (Replacement Lexan center section only)
Front Wing Kit, electric or gas #BP3100 (includes aluminum center, Lexan sides and mounts)
Aluminum Front Wing Center, electric or gas #BP3101A (Replacement aluminum center section only)
Lexan Front Wing Center, electric or gas #BP3101L (Replacement Lexan center section only)
Other replacement parts such as roll cages, chassis plates, suspension towers, etc. are also available.
