CarCapsule
The Ultimate Car Cover
The Continuous Airflow Vehicle Storage System
Doesn't your car deserve this kind of protection?

Indoor Car Capsule
The Indoor Car Capsule is easy to use! Just park the vehicle on the base mat, place the cover over the vehicle and zip it closed. Plug in the fan and you're ready for short or long-term storage.
Here's how to use the
Car Capsule.
STEP
1
Roll out the Car Capsule. The Car Capsule
has two zippers that run around the basemat to the back where the fan is located.
Just unzip and roll the upper shroud towards the fan.
STEP
2
Pull the vehicle on the basemat and roll
the upper shroud over the vehicle.
STEP 3
Zip up the unit and plug in the fan.
The Car Capsule takes 5-10 minutes to inflate.
The inflated Car Capsule takes up about 1 foot on either side
of the vehicle.
The inflated car capsule extends approximately 6"
front and rear.
Car Capsules provide the best possible storage environment for your vehicle, giving you a space that has an uninterrupted flow of fresh air to remove existing moisture and prevent the formation of any condensation. Whether you are storing a road car, antique, racecar or motorcycle, Car Capsule will keep it in a dust-free, clean and dry environment, away from scratches, dents, bikes, rakes, pests and other potential dangers to your prized possession.
Continuous Airflow - Evaporative storage keeps your car dry, stops corrosion and mildew, and eliminates musty interior odors. The Car Capsule does not eliminate humidity; it eliminates condensation. The fan exchanges the air by volume 3-4 times every hour. This constant air change and air flow does not allow hot air and cold masses to meet. This in turn eliminates condensation and keeps the vehicle dry regardless of the temperature or humidity level.
Filtered Air - Dust and insect free. Keeps your car in show condition without detailing.
Inflated Bubble - Protects your investment against children, pets, accidental scratches and dents. The clear cover of the indoor Car Capsule shows off your car or motorcycle while its protects.
Safe Storage - Store your vehicle in the worst of environments: barns, warehouses, workshops, rental storage, etc. without fear.
Sizes - A Car Capsule that is larger than your vehicle is recommended since the extra space inside the Capsule provides a buffer zone for extra protection against dents, chips and scratches. The inflated Car Capsule takes up about 1 foot on either side of the vehicle. The inflated car capsule extends approximately 6" front and rear.
Warranty - The
Indoor Car Capsule is guaranteed for one year against all defects in workmanship and
materials. Repair or replacement will be made upon receipt of the product by
CarCapsule freight prepaid. Please contact us prior to shipping back for warranty
work.
Using the Indoor Car Capsule outdoors will void all warranties.
Indoor
Capsule 
Indoor Capsule Specifications:
Basemat is a laminated vinyl fabric that is flame, mildew and rot
resistant and easy to clean.
Upper Shroud is 10 mil.PVC, clear
double-polished and double-sewn.
Fan is 12V, high pressure,
produces 50cfm.
Zipper is 100% nylon.
| BB8 | 8' x 32" wide x
68" tall indoor motorcycle capsule (inflates to 54" wide) |
$269.00 including freight! * |
| CC14 | 14' long x 68" wide x 68" tall indoor car capsule | $349.00 including freight! * |
| CC16 | 16' long x 72" wide x 68" tall indoor car capsule | $359.00 including freight! * |
| CC18 | 18' long x 76" wide x 68" tall indoor car capsule | $379.00 including freight! * |
| CC20 | 20' long x 78" wide x 68" tall indoor car capsule | $399.00 including freight! * |
* Prices include shipping within the 48
United States only.
Please contact us for freight charges to Alaska and Hawaii, and
for shipments outside the USA